The Edgewood Metal Roofing Consultation Worth Having
Edgewood Metal Roofing provides metal roofing to homeowners and commercial property owners across Edgewood, from storm damage repair to full metal roof replacement. Licensed and insured in Indiana, we offer free on site inspections and written estimates so Edgewood property owners know exactly what the job involves before any work begins.
If we're busy helping someone else and miss your call, we'll call you back within 15 minutes.
Edgewood Metal Roofing installs and services metal roofing across Edgewood, IN: standing seam, exposed fastener systems, and the trim details that decide how long both last. Call (812) 515-1567.
- Services: commercial metal roofing, standing seam metal roofing, metal roof repair, metal roof replacement
- Service area: Edgewood, Madison County, IN and surrounding areas
- Response: Active metal roof leaks in Edgewood get priority service; seam and fastener repairs scheduled fast
- Licensed and insured (License #RC21100059)
- Serving Edgewood, IN since 2018
Schedule Your Free Roof Inspection
A proper metal roof inspection in Edgewood starts on the roof, not from the driveway. Our crew walks the roof and checks panel seams for separation, fasteners for backing out or missing washers, flashings at valleys and penetrations, and the finish and coating for chalking or hail bruising. We document every finding with photos, note trouble areas by location, and put it all together in a written report you can keep. That documentation matters, because small metal roof problems in Edgewood become expensive ones once wind gets under a lifted panel or water tracks down a loose seam. A thorough look now beats a surprise later.
I agree to be contacted by Edgewood Metal Roofing regarding my inquiry.
Ice builds differently on Edgewood metal than on shingles: less damming, more accumulation at valleys, snow guards, and shaded runs where melt refreezes. Water backed up behind an ice ridge will test every lap and closure it can reach. The Madison County details that survive are the ones installed assuming ice would arrive, with membrane and closures where the physics says the water will stand.
The Edgewood Metal Roofing estimate for a Edgewood metal roof names its nouns: gauge, finish system, profile, underlayment, and who bends the trim. That is deliberate. Metal bids across Madison County hide their differences inside identical bottom lines, and an owner who cannot compare scopes cannot compare anything. Ours is written to survive the kitchen table and the other two bids sitting on it.
Trades been on your metal roof? Edgewood Metal Roofing inspects Edgewood panels after HVAC, satellite, and holiday light crews leave: footprints checked, scratches touched with the manufacturer kit, fasteners they loosened reset to spec. Call (812) 515-1567. Most Madison County metal damage is caused by people who are not roofers, and the sooner it is closed the less it costs.
Payment Options That Work for You
A metal roof project is worth doing right the first time. Financing options through Edgewood Metal Roofing lender partners help you pay over time instead of cutting scope or delaying the work.
Pay for your project at a later time, but lock in today's pricing. Ideal for homeowners waiting on insurance settlements.
- No payments for 12 months
- No interest if paid in full
- Lock in current pricing today
Divide your project cost equally across 12 months with zero interest. Most homeowners choose this option for predictable budgeting.
- Equal monthly payments
- 0% interest for 12 months
- Simple, predictable budgeting
Spread your investment over up to 20 years with fixed equal payments. The right choice for larger projects or homeowners who prefer lower monthly amounts.
- Up to 20-year terms available
- Fixed equal payments
- Ideal for larger projects
Financing provided by Regions, Foundation Finance, Slice. Subject to credit approval. Rates, terms, and promotional periods are set by the lender and disclosed in writing before you sign.
The Edgewood Metal Roofing Scope
From inspections and repairs to full replacements and new panel installations, Edgewood Metal Roofing handles every metal roofing project with manufacturer-certified crews and clear documentation.
Commercial Metal Roofing in Edgewood
Commercial metal roofing for Edgewood businesses, including inspections, repairs, and full installs on standing seam and exposed fastener systems. We handle low slope and steep slope commercial metal roofs.
Learn moreStanding Seam Metal Roofing in Edgewood
Standing seam metal roof installation and repair for Edgewood homes and commercial buildings, with hidden fasteners and raised interlocking seams. We handle panel fabrication, flashing details, and trim.
Learn moreMetal Roof Repair in Edgewood
Targeted repair of metal roofs across Edgewood, including panel replacement, fastener reseating, flashing repair, and seam sealing. We diagnose the problem before we quote the fix.
Learn moreMetal Roof Replacement in Edgewood
Full metal roof replacement for Edgewood properties when the existing roof is past its service life or storm damaged beyond repair. Includes tear off, decking evaluation, and new panel install.
Learn moreMetal Roof Installation in Edgewood
New metal roof installation for Edgewood homes, garages, and commercial buildings on new construction or over existing structures where suitable. We handle layout, flashing, and finish trim.
Learn moreMetal Roofing in Edgewood
Complete metal roofing services for Edgewood property owners, from inspection and estimate through installation or repair. Residential and commercial work on standing seam and exposed fastener systems.
Learn moreEmergency Metal Roof Repair in Edgewood
Emergency metal roof repair for Edgewood properties dealing with active leaks, lifted panels, or storm damage that cannot wait. We prioritize these calls and stabilize the roof.
Learn moreStorm Damage Metal Roof Repair in Edgewood
Storm damage metal roof repair for Edgewood homes and businesses hit by hail, high wind, or debris. We document the damage in writing and photos for your insurance claim and complete the repair.
Learn more
Local Expertise, Real Results
Straight lines on a Edgewood roof come from a layout done on paper first.
Madison County weather runs the full cycle: hail in spring, heat through summer, freeze and thaw all winter. Edgewood Metal Roofing installs metal systems rated for exactly that, then details them so the rating survives the installer. That last part is where roofs are won and lost.
Edgewood Metal Roofing was founded in 2018 by Aaron Christy, who has been featured on FOX59, WISH TV, and RTV6, and the company has been focused on metal roofing across central Indiana ever since. We serve Edgewood, the wider Madison County footprint, and neighboring communities including Anderson, River Forest, Lapel, Alexandria, Elwood, and Frankton. Our crews are licensed and insured under Indiana license RC21100059, and the work stays local so Edgewood property owners are dealing with people who know the terrain and the housing stock. Whether the job is a small repair or a full panel replacement, we handle it directly.
The way we work in Edgewood is simple and consistent. Every project begins with a thorough on roof inspection where we photograph panel seams, fasteners, flashings, and any spots showing storm or age wear, then we hand you an honest written estimate that spells out the scope in plain language. If a repair makes more sense than a replacement, we will say so. On the install side, we take care with panel alignment, fastener torque, and clean flashing details, and we clean up thoroughly when the crew rolls off the property. No sales pressure, transparent line items, no vague scope.
Our Promise
Our promise to Edgewood property owners comes down to three things. First, a free on site inspection before any work is discussed, with photo documentation of what we find on the metal roof. Second, an honest written estimate with transparent line items, so the number you see is the number tied to the scope. Third, clean workmanship backed by a workmanship warranty, alongside the standard manufacturer coverage that applies to the panels and coatings we install.
What Our Edgewood Clients Count On
Serving Edgewood and Madison County with quality materials, thorough inspections, and transparent pricing.
Storm And Hail Response
Madison County sits in a corridor that regularly sees 60 mph gusts and hail large enough to bruise metal panels. When storms roll through, we prioritize damage calls and get eyes on the roof quickly. You get a clear read on what the storm did and what needs to happen next.
Edgewood Property Experience
Edgewood is largely bungalows and vernacular homes with moderate to steep gables, and that shape works well with standing seam and exposed fastener systems. We know how these roofs sit, where they leak, and which details matter. That means fewer surprises during the work.
Full-Scope Metal Roofing
We handle Edgewood metal roof work from the first inspection through the final walkthrough. That includes repairs, panel replacements, full tear offs, and new installs on both homes and commercial buildings. One crew, one point of contact, one written scope.
Insurance Documentation Done Right
Storm claims live or die on documentation. We photograph the damage, note the storm date, and put together a written report your insurance carrier and adjuster can actually work from. That makes the claim conversation shorter and clearer.
Real Jobs. Real Results.
Photos from recent metal roofing projects completed by our manufacturer-certified crew across Edgewood and Madison County. Every project is documented with photos and a written closeout package.
What to Expect Before Edgewood Panels Arrive
Step one is the inspection. We come to the Edgewood property, get on the roof when it is safe, and walk the metal panels end to end. We look at seams, fasteners, flashings, penetrations, and the coating condition, and we photograph anything that matters. Before we talk about work, you get a plain description of what the roof is doing and where the problems sit. If it is a repair job, we say so. If replacement makes more sense given the age and damage, we explain why and what that looks like.
Step two is the estimate and, when it applies, the insurance side. You receive a written estimate that lists scope, materials, and pricing so nothing is hidden. If a storm claim is in play, we hand over the photo documentation and damage notes so your insurance carrier and adjuster have what they need to evaluate the loss. works with your insurance carrier and we do not name drop policies we cannot see. Our job is to describe the damage accurately and answer questions from the adjuster during the walk if the timing lines up. You stay in the driver seat on the claim itself.
Step three is the work. Once the scope is signed and materials are in, we schedule the job around your calendar and the Edgewood weather window. The crew protects landscaping and siding, stages materials cleanly, and installs or repairs the metal roof with attention to panel alignment, fastener seating, and flashing details. When the work is done, we walk the roof and the ground with you, review what was done, and clean up the site including a magnetic sweep for stray fasteners. You leave the day with a finished roof and a clear record of the work.
Free Inspection With Photos
We inspect the metal roof on site at no cost and photograph seams, fasteners, flashings, and any damage or wear. You get a clear picture of the roof condition before any decisions get made.
Honest Written Estimate
After the inspection, you receive a written estimate with the scope, materials, and pricing spelled out. No verbal numbers, transparent line items, and no pressure to sign on the spot in Edgewood.
Insurance Documentation
If storm damage is involved, we document the damage in writing and photos so your insurance carrier and adjuster have what they need. We work alongside your claim without billing the carrier directly.
Clean Work And Final Walkthrough
The crew protects the property during the job and cleans up thoroughly at the end, including a magnetic sweep for fasteners. We walk the finished roof with you so you see exactly what was completed.
Recent Edgewood Metal Roofing Projects
3 before-and-after projects documented for the property owner and the property insurance carrier.
What we see most often on Edgewood metal roofs
Edgewood property owners typically call us about these scenarios.
Dented Pans From Foot Traffic
Footprints across the flat of a panel are somebody who walked where the metal had no support under it. The pan between the ribs is the weakest place on the roof, and a satellite installer or a chimney sweep can leave a line of dents that will not come back out. Walk near the ribs and over a rafter, or better, stay off it.
Dimpled Panels and Abandoned Screw Holes
Drive a screw too hard and the EPDM washer squeezes out from under the head, the panel dimples, and it stops sealing the day it went in. Drive it crooked and the gasket only touches on one side. Then there are the abandoned holes where a screw missed the purlin and got moved over an inch · Edgewood Metal Roofing patches those properly, because caulk over a hole is not a repair.
Screws That Have Backed Themselves Out
Exposed fastener panels move with every hot day and cold night, and that motion walks the screws back out of the framing. Sight down the run from the driveway and you will see heads standing proud in a line. The washer fails before the screw does · rubber breaks down under UV faster than the painted steel it holds down.
Long Panel Runs With Nowhere to Move
Panels get longer on a July afternoon and shorter on a January night, and the run from ridge to eave has to be free to do it. Pin it at both ends, or set fixed clips where floating clips belonged, and that movement goes somewhere else · oval fastener holes, ticking at sundown, seams pulling apart at the ridge.
Metal Roof Leaking at the Screws
On exposed fastener systems every screw is a hole in the roof held closed by a gasket, and Edgewood freeze thaw cycles crush those gaskets years before the panel wears out. Water follows the shank into the decking and shows up as ceiling stains rooms away. Edgewood Metal Roofing re-fastens with upsized screws, replaces failed washers, and checks decking moisture before closing anything up.
Rust Spots and Surface Corrosion
Rust on an Edgewood metal roof usually starts where paint was scratched during install, at cut panel edges, or under debris that held moisture against the finish. Caught early it is treatable with proper prep and a compatible coating system. Once corrosion perforates the panel, Edgewood Metal Roofing quotes panel replacement honestly instead of painting over a hole.
Three Simple Steps
From free inspection to project completion, we follow a disciplined process on every Edgewood metal roofing project.
Free Inspection
We review your metal roof, document conditions with photos, and explain findings in direct, practical terms. Inspections are scheduled at a time that works for you.
Transparent Estimate
A written outline detailing the recommended work and how each item benefits your property. No pressure. We explain options at a comfortable pace.
Quality Installation
Crews who work attentively, follow consistent timelines, and respect your property. Manufacturer warranty registration handled in your name.
Reviewed by Edgewood Metal Owners
4.9 stars across 2,307+ Google reviews.
"Quick repair on a panel flashing failure. Got us through hail season. They recommended a full assessment in spring which we have scheduled."
"Replaced our 28 year old exposed fastener roof with new standing seam. The cost was higher than a comparable asphalt replacement but the lifetime math made sense given how long we plan to stay. Quality work."
"The certifications are real and the work backs them up. Paint and workmanship warranties registered in our name with all documentation delivered."
"Easy to work with. Professional crew. Clean job site. Documentation delivered as promised."
The Edgewood Metal Roofing FAQ
Straight answers to the questions Edgewood property owners ask most.
Indiana Weather Affects Metal Roofs Year Round
Indiana sees some of the most varied weather in the country. Edgewood property owners deal with spring hail and severe thunderstorms, summer UV exposure, fall wind storms, and winter freeze thaw cycles. Understanding these patterns is how we plan maintenance, repairs, and replacement work.
Hail Denting Metal Panels
Edgewood has been named directly in severe thunderstorm warnings citing quarter size hail, and a recent county event produced hail up to 3.4 inches. That kind of impact bruises panels, chips coatings, and can crack sealant at seams. We inspect for denting patterns and coating fracture, then repair or replace affected panels.
Wind Lifting Panels
Straight line winds have hit Madison County at 75 to 83 mph, more than enough to lift panel edges and shear fasteners. Once a panel lifts, water finds the seam and the problem grows fast. We reseat panels, replace compromised fasteners, and check the surrounding field for hidden movement.
Fasteners Backing Out
Central Indiana temperature swings expand and contract metal panels every day, and over the years that thermal movement walks exposed fasteners out of their holes. On older Edgewood roofs we routinely find rows of loose or missing screws. We replace with oversized fasteners and fresh washers where the holes have opened up.
Finish And Coating Wear
On aging metal roofs across Edgewood, the paint finish chalks, fades, and eventually gives up its rust protection. Once the coating breaks down, corrosion starts at seams and fastener heads. We evaluate coating condition during inspection and advise whether recoating, spot repair, or replacement is the right call.
Choosing the Right Metal Roof for Edgewood
An honest breakdown of the three panel systems we install most frequently.
The most common metal roof choice in Edgewood is an exposed fastener steel panel system, often in a ribbed or ag panel profile. Owners pick it because it is affordable compared to standing seam, installs faster on the moderate gable pitches common on Edgewood bungalows, and holds up well to central Indiana wind and hail when the fasteners are seated correctly. It also comes in a wide range of colors and gauges, so it works on homes, garages, and outbuildings alike.
A step up for Edgewood homes is a heavier gauge steel panel with a premium coating system such as a PVDF finish. The thicker metal resists hail bruising better than lighter panels, and the upgraded coating holds its color and rust protection far longer than standard paint. It costs more up front, but on a property that has already lived through several Madison County hail events, the added durability usually pays back in fewer repairs and a much longer service life.
For Edgewood property owners planning to stay long term, standing seam is the premium option. The fasteners are hidden under raised seams, which removes the most common failure point on exposed fastener roofs and gives a cleaner look on steeper gables. It costs more than exposed fastener panels and takes longer to install, but the tradeoff is a metal roof that can outlast two or three asphalt cycles and shrug off the wind and hail Madison County regularly delivers.
Projects Across the Edgewood Map
Metal Roofing projects completed across Edgewood's neighborhoods and surrounding areas. Click any neighborhood for the specifics we have learned working there.
Where we respond near Edgewood
Indiana-licensed crews dispatched to Edgewood and the closest surrounding communities.
Metal Roofing Systems Compared in Edgewood
Quick reference for the four metal systems we install most often. Pricing reflects typical Edgewood installations.
Typical Edgewood market ranges as of 2026. The plus sign on upper numbers means your project may exceed the listed maximum based on inspection findings. Get a written scope and quote at no cost.
Edgewood Metal Roofing is powered by Indy Roof & Restoration
That backing is the difference between a website and a contractor. Indy Roof & Restoration is the contractor. They have been local to central Indiana since 2018, close enough to know Edgewood block by block. That reputation is measurable: 4.9 stars across 2,307+ verified Google reviews and counting.
Licensed and insured · License #RC21100059
They carry Owens Corning Preferred Contractor, Malarkey Certified Contractor, BBB A+ Accredited and Google Google Guaranteed. Outlets like FOX59, WISH TV, and RTV6 have told their story.
Expert Edgewood Metal Roofing Crews Available Now
Whether a recent storm rattled your metal roof, the panels on your Edgewood home are showing their age, or you are planning a replacement before the next round of weather, now is the time to get eyes on the roof. Schedule a free inspection with Edgewood Metal Roofing, no obligation, and we will document everything for your claim.